Prof. Dr. BURAK BAL

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

A phenomenological hydrogen induced edge dislocation mobility law for bcc Fe obtained by molecular dynamics

Baltacioglu M. F., Kapci M. F., Schön J. C., Marian J., Bal B.

International Journal of Hydrogen Energy , cilt.87, ss.917-927, 2024 (SCI-Expanded)

Hydrogen susceptibility of Al 5083 under ultra-high strain rate ballistic loading

Baltacioglu M. F., Mozafari F., AYDIN M., Cetin B., Oktan A. D., Teoman A., et al.

Materialpruefung/Materials Testing , cilt.66, sa.10, ss.1627-1643, 2024 (SCI-Expanded)

Edge dislocation depinning from hydrogen atmosphere in α-iron

Kapci M. F., Yu P., Marian J., Liu G., Shen Y., Li Y., et al.

Scripta Materialia , cilt.247, 2024 (SCI-Expanded)

An atomistic study on the HELP mechanism of hydrogen embrittlement in pure metal Fe

Hasan M. S., Kapci M. F., Bal B., Koyama M., Bayat H., Xu W.

International Journal of Hydrogen Energy , cilt.57, ss.60-68, 2024 (SCI-Expanded)

The Effect of Strain Rate on the Hydrogen Embrittlement Susceptibility of Aluminum 7075

BALTACIOĞLU M. F., Cetin B., BAL B.

Journal of Engineering Materials and Technology , cilt.145, sa.2, 2023 (SCI-Expanded)

Finite Element Analysis of the Stress Distribution Associated With Different Implant Designs for Different Bone Densities

LEBLEBİCİOĞLU KURTULUŞ İ., KILIÇ K., BAL B., Kilavuz A.

JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY , cilt.31, sa.7, ss.614-622, 2022 (SCI-Expanded)

Investigations of strain rate, size, and crack length effects on the mechanical response of polycaprolactone electrospun membranes

Bayram F. C., KAPÇI M. F., Yuruk A., İŞOĞLU İ. A., BAL B.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING , cilt.235, sa.6, ss.1957-1970, 2021 (SCI-Expanded)

Experimental and Molecular Dynamics Simulation-Based Investigations on Hydrogen Embrittlement Behavior of Chromium Electroplated 4340 Steel

Dogan O., KAPÇI M. F., Esat V., BAL B.

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME , cilt.143, sa.4, 2021 (SCI-Expanded)

Development of an optical measurement system for surface depth measurements and study of focus effect on determination of steel inclusion content by EN-10247

Durkaya G., KURTULDU H., Cetin B., BAL B.

OPTICAL ENGINEERING , cilt.60, sa.10, 2021 (SCI-Expanded) Sürdürülebilir Kalkınma

The role of hydrogen in the edge dislocation mobility and grain boundary-dislocation interaction in alpha-Fe

KAPÇI M. F., Schoen J. C., BAL B.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.46, sa.64, ss.32695-32709, 2021 (SCI-Expanded)

Assessment of biocompatibility of novel TiTaHf-based high entropy alloys for utility in orthopedic implants

Gurel S., Nazarahari A., Canadinc D., Cabuk H., Bal B.

Materials Chemistry and Physics , cilt.266, 2021 (SCI-Expanded)

Effect of pre-rolling temperature on the interfacial properties and formability of steel-steel bilayer sheet in Single Point Incremental Forming

Hassan M., Hussain G., Ali A., Ilyas M., Malik S., Khan W. A., et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE , cilt.235, sa.3, ss.406-416, 2021 (SCI-Expanded)

Fracture behavior of novel biomedical Ti-based high entropy alloys under impact loading

Gurel S., Yagci M. B., Canadinc D., Gerstein G., Bal B., Maier H. J.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.803, 2021 (SCI-Expanded) Sürdürülebilir Kalkınma

Corrosion behavior of novel Titanium-based high entropy alloys designed for medical implants

Gurel S., Yagci M. B., Bal B., Canadinc D.

Materials Chemistry and Physics , cilt.254, 2020 (SCI-Expanded)

Lateral Angular Co-Extrusion: Geometrical and Mechanical Properties of Compound Profiles

Thuerer S. E., Peddinghaus J., Heimes N., Bayram F. C., BAL B., Uhe J., et al.

METALS , cilt.10, sa.9, 2020 (SCI-Expanded)

A detailed investigation of the effect of hydrogen on the mechanical response and microstructure of Al 7075 alloy under medium strain rate impact loading

BAL B., Okdem B., Bayram F. C., AYDIN M.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.45, sa.46, ss.25509-25522, 2020 (SCI-Expanded)

Strain rate and hydrogen effects on crack growth from a notch in a Fe-high-Mn steel containing 1.1 wt% solute carbon

Najam H., Koyama M., BAL B., Akiyama E., Tsuzaki K.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.45, sa.1, ss.1125-1139, 2020 (SCI-Expanded)

The Precise Determination of the Johnson-Cook Material and Damage Model Parameters and Mechanical Properties of an Aluminum 7068-T651 Alloy

BAL B., Karaveli K. K., Cetin B., Gumus B.

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME , cilt.141, sa.4, 2019 (SCI-Expanded)

Experimental investigation on chloroprene and acrylonitrile butadiene rubber types reinforced with nano-materials

Dogan O., Esat V., BAL B.

MATERIALS RESEARCH EXPRESS , cilt.6, sa.8, 2019 (SCI-Expanded)

On the detailed mechanical response investigation of PHBV/PCL and PHBV/PLGA electrospun mats

BAL B., Tugluca I. B., Koc N., İŞOĞLU İ. A.

MATERIALS RESEARCH EXPRESS , cilt.6, sa.6, 2019 (SCI-Expanded)

Lowering Strain Rate Simultaneously Enhances Carbon- and Hydrogen-Induced Mechanical Degradation in an Fe-33Mn-1.1C Steel

Tugluca I. B., Koyama M., Shimomura Y., BAL B., Canadinc D., Akiyama E., et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , cilt.50, sa.3, ss.1137-1141, 2019 (SCI-Expanded)

Microstructure and tribological properties of TiTaHfNbZr high entropy alloy coatings deposited on Ti-6Al-4V substrates

Tuten N., Canadinc D., Motallebzadeh A., BAL B.

INTERMETALLICS , cilt.105, ss.99-106, 2019 (SCI-Expanded)

Microstructure and tribological properties of TiTaHfNbZr high entropy alloy coatings deposited on Tie6Ale4V substrates

Tüten N., CANADINC D., Motallebzadeh A., BAL B.

INTERMETALLICS , cilt.105, ss.99-106, 2019 (SCI-Expanded)

On the Utility of Crystal Plasticity Modeling to Uncover the Individual Roles of Microdeformation Mechanisms on the Work Hardening Response of Fe-23Mn-0.5C TWIP Steel in the Presence of Hydrogen

Bal B., Koyama M., Canadinc D., Gerstein G., Maier H. J., Tsuzaki K.

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME , cilt.140, sa.3, 2018 (SCI-Expanded)

A Study of Different Microstructural Effects on the Strain Hardening Behavior of Hadfield Steel

BAL B.

INTERNATIONAL JOURNAL OF STEEL STRUCTURES , cilt.18, sa.1, ss.13-23, 2018 (SCI-Expanded)

High-concentration carbon assists plasticity-driven hydrogen embrittlement in a Fe-high Mn steel with a relatively high stacking fault energy

Tugluca I. B., Koyama M., BAL B., Canadinc D., Akiyama E., Tsuzaki K.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.717, ss.78-84, 2018 (SCI-Expanded)

Numerical Investigation of the Role of Volumetric Transformation Strain on the Relaxation Stress and the Corresponding Hydrogen Interstitial Concentration in Niobium Matrix

BAL B.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING , 2017 (SCI-Expanded)

A New Venue Toward Predicting the Role of Hydrogen Embrittlement on Metallic Materials

BAL B., Sahin İ., Uzun A., Canadinc D.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , sa.11, ss.5409-5422, 2016 (SCI-Expanded)

Effect of strain rate on hydrogen embrittlement susceptibility of twinning-induced plasticity steel pre-charged with high-pressure hydrogen gas

Bal B., Koyama M., Gerstein G., Maier H. J., Tsuzaki K.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.41, sa.34, ss.15362-15372, 2016 (SCI-Expanded)

Incorporation of dynamic strain aging into a Visco-Plastic Self-Consistent model for predicting the negative strain rate sensitivity of Hadfield steel

BAL B., Gumus B., Canadinc D.

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME , cilt.138, ss.1-8, 2016 (SCI-Expanded)

Twinning activity in high-manganese austenitic steels under high velocity loading

Gumus B., Bal B., GERSTEIN G., Canadinc D., MAIER H. J.

MATERIALS SCIENCE AND TECHNOLOGY , cilt.32, sa.5, ss.463-465, 2016 (SCI-Expanded)

Twinning activities in high-Mn austenitic steels under high-velocity compressive loading

Gumus B., Bal B., GERSTEIN G., Canadinc D., MAIER H. J., GUNER F., et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.648, ss.104-112, 2015 (SCI-Expanded)

Experimental and Numerical Evaluation of Thickness Reduction in Steel Plate Heat Exchangers

Onal O., Bal B., Canadinc D., Akdari E.

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME , cilt.137, sa.4, 2015 (SCI-Expanded)

On the micro-deformation mechanisms active in high-manganese austenitic steels under impact loading

Bal B., Gumus B., GERSTEIN G., Canadinc D., MAIER H. J.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.632, ss.29-34, 2015 (SCI-Expanded)

Microstructure-based modeling of the impact response of a biomedical niobium-zirconium alloy

Onal O., Bal B., Toker S. M., Mirzajanzadeh M., Canadinc D., MAIER H. J.

JOURNAL OF MATERIALS RESEARCH , cilt.29, sa.10, ss.1123-1134, 2014 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Investigation of Hydrogen Diffusion Profile of Different Metallic Materials for a Better Understanding of Hydrogen Embrittlement

KAPÇI M. F., BAL B.

Gazi University Journal of Science , cilt.36, sa.4, ss.1775-1784, 2023 (ESCI)

Accurate Prediction of Residual Stresses in Machining of Inconel 718 Alloy through Crystal Plasticity Modelling

Kesriklioglu S., KAPÇI M. F., Buyukcapar R., CETIN B., Yılmaz O. D., Bal B.

Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.23, sa.1, ss.247-259, 2023 (Hakemli Dergi)

DETERMINATION OF MATERIAL RESPONSE AND OPTIMIZATION OF JOHNSON-COOK DAMAGE PARAMETERS OF ALUMINIUM 7075 ALLOY

BAL B.

Selçuk Üniversitesi Mühendislik, Bilim ve Teknoloji Dergisi , cilt.6, sa.2, ss.343-354, 2018 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler

Data-driven discovery and DFT modeling of Fe4H on the atomistic level

Zagorac D., Zagorac J., Djukic M. B., Bal B., Schön J. C.

5th International Conference on Structural Integrity, ICSI 2023, Funchal, Portekiz, 29 Ağustos - 01 Eylül 2023, cilt.54, ss.446-452

Effect of Hydrogen on Impact Response of Ductile Cast Iron

Najam H., BAL B., Çetin B.

International Energy and Engineering Conference 2019, 24 - 25 Eylül 2019

Detailed Comparison of Hydrogen Concentration Modelling in Different Metal Matrices

BAL B., Ali S. F., Malik F.

International Energy and Engineering Conference 2019, 24 - 25 Eylül 2019

EFFECT OF HEAT TREATMENTS ON THE BOND STRENGTH OF COLD ROLL BONDED SN COATED STEELS

BAL B., Kapcı M. F.

ZEUGMA II. ULUSLARARASI MULTİDİSİPLİNER ÇALIŞMALAR KONGRESİ, 18 - 20 Ocak 2019

Better Understanding of Hydrogen Embrittlement

BAL B., Tuğluca İ. B., Koyama M., Tsuzaki K.

2018 STLE Tribology Frontiers Conference, 28 - 31 Ekim 2018

The Mechanical Responses of Lightweight Aluminum Alloys and Their Applications

Karaveli K. K., BAL B.

3th International Conference on Material Science and Technology in Cappadocia (IMSTEC’18), 17 - 19 Eylül 2018

A COMPARATIVE STUDY ON HYDROGEN EMBRITTELEMENT MECHANISMS

BAL B., Yerlitaş M., Çetin B., Meço H.

The 18th International Conference on Machine Design and Production, 3 - 06 Temmuz 2018

COMPARING THE MECHANICAL RESPONSE OF Al 7075 AND Al7068

Karaveli K. K., Gümüş B., BAL B.

The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, 10 - 12 Nisan 2018

MATERIAL SELECTION FOR KNEE EXOSKELETON FRAME

Najam H., BAL B., ÜNAL R.

The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, 10 - 12 Nisan 2018

Effects of chemical composition and hydrogen charging on the mechanical response of slip-dominated high manganese austenitic steel

Tuğluca İ. B., BAL B., Koyama M.

The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, 10 - 12 Nisan 2018

Kitaplar

Potential Effects of Short-Range Order on Hydrogen Embrittlement of Stable Austenitic Steels—A Review

Bal B.

Advances in Hydrogen Embrittlement Study, Prof. Dr. Vladimir A. Polyanskiy,Prof. Dr. Alexander K. Belyaev, Editör, Springer, London/Berlin , London, ss.1-18, 2021

Metrikler

Yayın

Atıf (WoS)

117

H-İndeks (WoS)

Atıf (Scopus)

115

H-İndeks (Scopus)

Atıf (Scholar)

233

H-İndeks (Scholar)

Proje

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Proje