Zeolite Synthesis by Alkali Fusion Method Using Two Different Fly Ashes Derived From Turkish Thermal Power Plants

Creative Commons License

TOP S., VAPUR H.

Bilimsel Madencilik Dergisi, cilt.59, sa.1, ss.7-14, 2020 (Scopus)

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 59 Sayı: 1
  • Basım Tarihi: 2020
  • Doi Numarası: 10.30797/madencilik.70548
  • Dergi Adı: Bilimsel Madencilik Dergisi
  • Derginin Tarandığı İndeksler: Scopus, TR DİZİN (ULAKBİM)
  • Sayfa Sayıları: ss.7-14
  • Abdullah Gül Üniversitesi Adresli: Evet

Özet

In this study, Faujasite (Na-LSX) (3.5(Ca0.3)3.5(Na0.6)3.5(Mg0.1)Al7 Si17O48•32(H2 O)) type zeolites and Ca-Filipsite (CaK0.6Na0.4Si5.2Al2.8O16•6(H2 O)) type zeolites were produced from Sugözü Thermal Power Plant and Çatalağzı Thermal Power Plant fly ashes by alkali fusion method followed by water leaching, respectively. In these methods, fly ashes and sodium hydroxide (NaOH) were mixed in certain proportions and sintered at 600 °C in ash furnace. Then, zeolites were obtained from the ground materials after water leaching and solid/liquid separation, respectively. Cation Exchange Capacity (CEC), X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Fourier-Transform Infrared Spectroscopy (FTIR), X-Ray Fluorescence (XRF) and Atomic Absorption Spectrometer (AAS) analyses were used to characterize the synthesized zeolites. The zeolites synthesized with Sugözü fly ashes in a ratio of 1:2 had 136.93 meq/100 g CEC, whereas the CEC of synthesized zeolite from Çatalağzı fly ashes was found to be 247.88 meq/100 g. As a result, zeolites, which can be used as wastewater treatment agent, energy storage material, catalyst and separator, were synthesized by using 2 different Class F fly ash.